Unclog your blocked toilet with this simple, ingenious trick –

I can’t claim credit for inventing this method of plunging a toilet without a plunger — you’ll find it all across the web on DIY and plumbing blogs, both known and obscure — but I can testify that it works.

I’ve honed and practiced this ancient art of washroom wizardry over the course of many years, and have never needed to buy a plunger. If your social life is a lot more limited these days, this is still a particularly handy technique to have in your repertoire should you ever accidentally clog up someone else’s restroom, you don’t see a plunger anywhere, and might be hesitant (read: embarrassed beyond belief) to call for backup.

Even if you keep a trusty plunger in the bathroom, try this trick first the next time your toilet gets clogged and you might be able to avoid the drips, splashes, and general unsanitary mess that can come along with using a plunger. This guide is updated occasionally.

Most bathrooms have everything you’ll need

To perform this trick, you’ll need three things that can be found in almost any bathroom: soap, hot water and a vessel for transferring the water to the toilet bowl. Dish soap and a 5-gallon bucket work best, but if secrecy is paramount and leaving the lavatory would blow your cover, a small plastic waste bin and a few pumps from a hand soap dispenser will do just fine.

To prepare, you’ll want to get the hot water running in the sink or tub and give it enough time to reach its maximum temperature. You don’t want (or need) to use boiling water, which could damage the toilet’s porcelain, or worse, injure you. Just let the tap get as hot as it can get — that’ll be hot enough.

Read more: Best shower head of 2020  

Now playing:
Watch this:

The future of poop tech: Charmin’s toilet paper delivery…

2: 01

While you’re waiting for hot water, go ahead and clear everything off the floor, like scales and bathmats. You’re going to be very careful to avoid any spills, of course, but better to be safe than soggy.

Mixing the magical potion

The objective is to get the liquid in the toilet bowl as hot and soapy as possible without letting it overflow. You can either pour (or pump) soap directly into the bowl and then add hot water, or you can mix the soap with the hot water before you add it to the bowl.

I prefer to add soap directly to the toilet bowl if the clog hasn’t left a lot of clearance (say, less than an inch). This ensures a high soap-to-water ratio. If, however, there’s ample space above the water line (an inch or more), premixing ensures more even soap distribution.

You really can’t overdo the soap at this point. You’re not going to be agitating the solution, so you won’t spawn a suds volcano if you go overboard. I’m not saying you have to pour the whole bottle in there, but I’m also not saying you shouldn’t. Anywhere from a tablespoon to a half cup should work.

Carefully and gently add the hot water

Mixing everything up in the toilet bowl is the step requiring the most finesse. You want to raise the average water temperature and get the soap into every crevice, but you don’t necessarily want to create a slurry with what’s already in there.